Updating bios using asus ez flash 2

17-Aug-2019 18:01 by 3 Comments

Updating bios using asus ez flash 2 - teen dating versus studying

Restart your computer and press or hold down the appropriate key to enter your system BIOS. However it may be F2 or F8 on some laptops and desktop systems.

Now you can download your motherboard’s latest BIOS update and update utility from the manufacturer’s website.Going forward, each flash utility is a bit different but simple enough to understand.Plus they all provide info on how to proceed once the application is initiated in DOS.Just for the record: try to remove one of the DIMMs (the one closer to the CPU, forgot which slot number it is), turn on power, the BIOS will POST now. Hmm, there actually is a comment on the ASUS website: 'Earlier BIOS may boot up with single channel memory only' Install a working BIOS via EZ Flash or AFUDOS and then put the 2nd DIMM back in (after switching off). SLanguage=en-us&model=A8V Deluxe Apparently the problem is that the BIOS on the support CD is too old to run certain newer CPUs in dual-channel mode, that's why removing one of the DIMMs helps (sometimes).Unfortunately that resulted in a problem with my CPU fan, so I wanted to use the same utility to get me back to my original BIOS version. So instead I decided to try to see if the fan-problem was fixed in the available beta BIOS. Leaving me with a dead computer that would not boot, let alone let me update to a proper BIOS again.

Not only didn't that bios fix the problem, it also made my floppy drive inaccessible. Here's what Asus tech support had to say about it, when I explained what happened and requested a new bios chip: (this would be soo funny if it weren't sad) Sir, Very sorry, we can't send you a alone bios chip.because the mb's an mac address, 1394 address are writen in the bios chip we send you a bios chip with program, the addresswill be error.I thought it may be a good idea for future reference to use my favourable Google status to tell the world about my experiences flashing the BIOS on my Asus A8V Deluxe motherboard. In an effort to make the computer as up to date as possible, I decided to upgrade the BIOS. Asus has a unique feature on their boards that will let you flash directly from floppy or cd, without booting into dos first. Having no access to my floppy drive because of the buggy beta bios, I decided to use the CD that came with the motherboard and flash the BIOS version that's on it. Flashing went as planned (I'ld even say it went surprisingly well), but unfortunately the machine would not boot, not beep, not do anything...Note: this post is a bit long and windy, but there's an hilarious tech support reply in the end... Using Asus (ugly-as-sin) Windows based flash utility, I upgraded to the latest non-beta BIOS. That would be the safest, surest working option, right? I thought something must have gone wrong with the flashing, but some googling learned me the BIOS on the CD must have been too old for my processor, and instead of running the processor at a low speed, Asus decided it was best to just shut down to prevent damage.Rufus formats your USB into a FAT32 file format by default, targeting UEFI or DOS system types.It will create a bootable USB using MS-DOS or Free DOS depending on your preference.Remember to back up your existing BIOS before beginning.